THE DOSAGE DEPENDS ON THE OIL SYSTEM CAPACITY. The product is designed to protect from wear and to provide restoring repair of all types of fuel equipment of gasoline and diesel engines. Due to its by 20% greater* active agent’s concentration, it offers strong restoration potential to the worn out surfaces and wear protection. * compared to XADO gel-revitalizant for fuel equipment. During the treatment of fuel pumps the product forms a metal-ceramic coating on the surfaces of the friction metal parts. As a result, the geometry of all parts is restored. Revitalizant is universal for all types of fuel systems, including K-KE-L-Jetronic, Common Rail, Pumpe Düse etc. Application instructions: Treatment of engine fuel equipment with capacity of up to 5 QT 1. Press out the content of the syringe into a fuel tank with minimal fuel content. 2. Fill the tank with 40 L of fuel. 3. Run the car in normal mode. 4. The treatment is considered complete after about 100 hours of the mechanism operation (approx. 1,860 miles of run). Dosage: 0-5qt Engine Oil System Capacity = 1 Syringe 5-15qt Engine Oil System Capacity = 2 Syringes 15-30qt Engine Oil System Capacity = 3 Syringes It is recommended to clean the engine fuel system before application of the product. Other (non-standard) filtering devices may reduce the revitalization effect. YOU CAN ALSO PURCHASE THIS PRODUCT IN OUR SPECIAL OFFERS – KIT AUTOMATIC TRANSMISSION AND KIT MANUAL TRANSMISSION.
- Restores And Protects The Friction Parts Of Fuel Pumps Of All Types, Jets And Pump-injector Units Against Wear.
- Reliably Protects From Low-quality Fuel.
- Reduces Fuel Consumption.
- Decreases Noise And Vibration Level. Decreases The Level Of Toxic Components In The Exhaust Gases.
- THE DOSAGE DEPENDS ON THE ENGINE OIL SYSTEM CAPACITY.